In our November 18, 2026 roundup, two small hardware projects show why editable design files matter. One puts hands-on tape-deck controls in your pocket. The other brings two classic CPLDs onto a breadboard, with a small but traceable component change.
TWEACMAN: Scrub audio with two knobs

Mykle Hansen’s TWEACMAN reads WAV samples from an SD card and lets you scrub through them with two continuous-rotation controls. The carrier uses a SparkFun Thing Plus RA6M5 and a pair of dual-element Taiwan Alpha potentiometers. In the November 15 update (Pacific time), Hansen changed the DAC output filter and made both channels use the same film capacitor, updating the editable schematic, board and BOM together. The November 16 author write-up describes a working prototype, not a finished kit.
Open the pinned KiCad project, schematic, layout and BOM. The carrier and knob designs are licensed CERN-OHL-S-2.0; the software uses separate licenses. We inspected the project files but did not independently test the revised filter.
ATF1504 and ATF1508 breakouts: CPLDs on a breadboard

Adrien Kohlbecker’s two breakout boards bring PLCC CPLDs out to breadboard headers and provide a JTAG connector. On November 16, both revisions changed their decoupling capacitors from 100 nF to 220 nF and carried the update through the schematic, PCB and parts list. That is a useful example of keeping the design files in step with each other. It is not a new board launch, and we did not independently verify the revised boards on hardware.
See the author’s project notes or browse the editable PLCC-44 and PLCC-84 KiCad schematics and boards. Both are under CERN-OHL-W-2.0.
source https://blog.tindie.com/2026/11/open-hardware-files-a-pocket-sample-scrubber-and-two-cpld-breakouts/
No comments:
Post a Comment