Open Hardware Files: A Bench Test Board and a PCB Revision

This November 17 edition looks at two kinds of hardware progress you can follow in KiCad: a change to a bench-test board’s logic-analyzer connections and a component substitution carried through to the fabrication files. Both project links point to the exact revisions discussed here.

BenchPod Digital: Bringing hardware into firmware tests

BenchPod is designed to put hardware on the other end of an automated test: it can simulate sensor inputs, communicate over CAN, and capture digital signals. The November 17 update to the digital board changes logic-analyzer channel connections and updates the matching PCB and project configuration.

The editable KiCad 10 project includes the board layout and hierarchical schematic. See the logic-analyzer revision and the CERN-OHL-W-2.0 hardware license. We checked the source files, but did not verify that this particular revision has been built or tested.

Simplified top-layer PCB visualization of BenchPod Digital
BenchPod Digital top-layer PCB layout, simplified from the source board at ac1fb0f. Design: embeddedci.com / BenchPod contributors, CERN-OHL-W-2.0. Illustration, not a photograph or manufacturing drawing.

UIUCTag: Two capacitors, one synchronized release

The November 17 UIUCTag update from Tag Designs changes the specified Murata capacitors at C4 and C404 and updates the schematic, PCB and manufacturing package together. It is a useful example of why a small sourcing change belongs in both the design and the files sent to a board assembler.

The KiCad 10 project directory contains editable files as well as the Gerbers, BOM and placement data. See the revision details and the CERN-OHL-P-2.0 hardware license. We inspected the file headers, not a manufactured sample.

UIUCTag top copper in orange and board outline in cyan
UIUCTag top copper and board outline, rendered from the Gerbers at 51ecf78. Design: Tag Designs contributors, CERN-OHL-P-2.0. Colors added for clarity; other layers and drill holes omitted. Not a photograph.

Before making either board, review the source revision, license and manufacturing notes. We did not run ERC or DRC or reproduce any hardware tests for this roundup.



source https://blog.tindie.com/2026/11/open-hardware-files-a-bench-test-board-and-a-pcb-revision/

No comments:

Post a Comment